POKEMON (Aura)

Project: pokemon.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 122.31x170mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic Red Transmission Distance: 5 PLA BambuLab Basic Brown Transmission Distance: 2 PLA BambuLab Matte Sakura Pink Transmission Distance: 3 PLA BambuLab Basic Beige Transmission Distance: 8 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 6 unique filamentsSwap Instructions: Start with Black At layer #7 (0.64mm) swap to Red At layer #10 (0.88mm) swap to Brown At layer #13 (1.12mm) swap to Sakura Pink At layer #21 (1.76mm) swap to Beige At layer #24 (2mm) swap to Jade White for the rest.