Slicer Discord
Pokemon Blitza / Jolteon Lightbox – Modelo 3D imprimible de MakerWorld MakerWorld
2D Art

Pokemon Blitza / Jolteon Lightbox

por Manuel-P · 2D Art
27 Descargas
8 Likes
14 Makes
Ver Modelo
Nicer result with 2 mm nozzle.Remove the purge lines before printing, otherwise they may be in the model.All lids have a hanging hole. Lid 1 with hole for a cable. Lid 2 with battery compartment and switch, printed in PLA and PETG as support interface. I used M3 threaded sleeves to attach the battery cover.I used these battery compartments: https://www.amazon.de/dp/B0C2Q41DTT?ref=ppx_yo2ov_dt_b_product_details&th=1For this you need a 5v LED stripand these switches: https://www.amazon.de/dp/B08CY41YT5?ref=ppx_yo2ov_dt_b_product_details&th=1 Lid 3 for a battery compartment with remote control. Just attach the front part a little with hot glue so that you can open it again to change the battery. The remote control works through the front.The lid is intended for this battery compartment with LED strips: https://www.amazon.de/dp/B08QCMFJW8?ref=ppx_yo2ov_dt_b_product_details&th=1 Filaments used:Bambu PLA Matte BlackBambu PLA Matte White<
Categoría
2D Art
Fuente
MakerWorld
Publicado
Actualizado
Lo que necesitas para imprimir: Intermedio Baja confianza
¿Por qué?
impresión grande · postproceso considerable
Pieza única Tornillería requerida
Soportes 1/3
Ensamblaje 0/3
Ajustes 1/3
Tamaño de cama 2/3
Postproceso 2/3
Impresora
FDM / FFF
Formato de archivo
STL
Material
PLA, PETG
Cama mín.
200 mm (Grande)
Postprocesado
Pegado, Tornillería
Software
Cura, PrusaSlicer o similar
Aún no hay valoraciones
Aún no hay comentarios – ¡sé el primero!

Modelos similares

6 Sugerencias
Feed Blog Slicer Calculadora Búsqueda por imagen Enviar Contacto Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Añadir a colección