Pokemon Card Back version 2 Hueforge

Finally decided to upload an updated version of the pokemon card back. You'll find that is is more accurate than the first one.There is a pause on layer 24, it's for you to change colors if you have a single AMS. Please use a high TD white!Project: PokemonbackVER6.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 150x208.01mm in sizeYou may print at higher layer heights below the Min Depth of 0.4mmThe Max Depth is 4.5mm and the Actual Depth is 3.8mmFilaments Used: PLA+ Esun Dark Blue Transmission Distance: 2 PLA Kingroon Black Transmission Distance: 0.4 PLA PolyLite Azure Blue Transmission Distance: 3 PLA+ eSun White Transmission Distance: 6.5 PLA Kingroon Gray 2 Transmission Distance: 4.8 PLA PolyTerra Savannah Yellow Transmission Distance: 3.5 PLA+ eSun Fire Engine Red Transmission Distance: 4This print uses 7 unique filamentsSwap Instructions: Start with Dark Blue At layer #7 (0.64mm) swap to Black At layer #9 (0.8mm) swap to Dark