Pokemon Gen 1

Filaments Used: PLA BambuLab Basic Black PLA BambuLab Basic Orange PLA BambuLab Basic BambuLab Green PLA BambuLab Matte Ice Blue PLA BambuLab Basic Yellow PLA BambuLab Basic Jade White Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Orange At layer #15 (1.28mm) swap to BambuLab Green At layer #19 (1.6mm) swap to Ice Blue At layer #28 (2.32mm) swap to Yellow At layer #33 (2.72mm) swap to White for the rest. The Model is 120x200mm in sizeYou need a different size:Remember, if scaling is desired, modify only the x and y axes; the z-axis must remain unchanged. You can find the matching Hueforge frame here.https://makerworld.com/en/models/2307079-picture-frame-120x200mm#profileId-2518456 Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 4.48mm and the Actual Thickness is 3.12mm</p