Pokémon - Lightbox Annihilape

The light box can be printed like in profile without supports and without a brim. The light box is 83mm deep overall (81mm light box and 2mm back plate). I used the LED kit from BambuLab. I initially printed a narrower version, but it didn't look good with the LED kit because the light was too close to the front wall and you only saw a circle of light. With the current depth, the light is distributed perfectly in the light box. With a normal LED strip, you can also print the box narrower. The front is 3 layers (0.6mm) thick, except for the Gray, Pink and Black Parts (5 Layers, 1mm). This is the perfect thickness so that the front doesn't break so easily and so that a lot of light still comes through. The Gray and Black parts are thicker, because i wanted to let only the White flames and red eyes glow. *** I recommend not scaling the Z axis, otherwise the front may become too thin and easily broken, or too thick that hardly any light can get through.*** If you would like to have