Pokemon Mewtwo

Filaments Used: PLA BambuLab Basic Black PLA BambuLab Basic Blue PLA ESUN Purple PLA BambuLab Basic Magenta PLA BambuLab Basic Jade White Swap Instructions: Start with Black At layer #9 (0.8mm) swap to Blue At layer #11 (0.96mm) swap to Purple At layer #15 (1.28mm) swap to Magenta At layer #17 (1.44mm) swap to Jade White for the rest. The Model is 120x200mm in size You need a different size: Remember, if scaling is desired, modify only the x and y axes; the z-axis must remain unchanged. You need an A1 Mini profile; if you are interested, simply send a message. You can find the matching Hueforge frame here. https://makerworld.com/en/models/2307079-picture-frame-120x200mm#profileId-2518456 Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.72mm and the Actual Thickness is 2.55191mm