Pokemon Mimikyu

The top and bottom images need the same colors at the same height.Simply attach it with some PLA glue, and you're done. You can find the matching Hueforge frame here. https://makerworld.com/en/models/2276100-picture-frame-400x200mm#profileId-2481667 Filaments Used:- PLA BambuLab Basic Black - PLA BambuLab Basic Blue Gray - PLA BambuLab Basic Beige - PLA BambuLab Basic Jade White Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Blue Gray At layer #12 (1.04mm) swap to Beige At layer #17 (1.44mm) swap to Jade White for the rest. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x400mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.24mm and the Actual Thickness is 1.6mm Remember, if scaling is desired, modify only the x and y axes; the z-axis must remain unchanged. Boost MeDo you like my model?Then I would be very grateful for your support with a free boost token.