Slicer Discord
Pokemon Pikachu  – 3D-Druckmodell von MakerWorld MakerWorld
2D Art

Pokemon Pikachu

12 Downloads
10 Likes
4 Makes
Zum Modell
Pokemon Pickachu Wall Art (hueforge) See Printing instructions below. you can scale to any size you want, but make sure you don't change the “Z” axis or it will throw off the color sequence. Need a way to display theses? check out my Wall Mounted Modular Hueforge Display complete it with the optional Desk Mount Printing Instructions: Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used:PLA+ Sunlu Black Transmission Distance: 0.6PLA+ Sunlu Red Transmission Distance: 6PLA+ Sunlu Sunny Orange Transmission Distance: 8PLA BambuLab Basic Yellow Transmission Distance: 6 Swap Instructions:Start with BlackAt layer #9 (0.8mm) swap to RedAt layer #11 (0.96mm) swap to Sunny OrangeAt layer #15 (1.28mm) swap to Yellow for the rest.
Kategorie
2D Art
Quelle
MakerWorld
Veröffentlicht
Aktualisiert
Was du zum Drucken brauchst: Fortgeschritten Niedrige Konfidenz
Warum?
aufwändige Nachbearbeitung
Supports 1/3
Zusammenbau 2/3
Einstellungen 1/3
Druckbett 0/3
Nachbearbeitung 2/3
Drucker
FDM / FFF
Dateiformat
STL
Material
PLA
Mindest-Druckbett
50 mm (Klein)
Nachbearbeitung
Bemalen, Kleben
Software
Cura, PrusaSlicer o. Ä.
Noch keine Bewertungen
Noch keine Kommentare – sei der Erste!

Ähnliche Modelle

6 Vorschläge
Feed Blog Slicer Kostenrechner Bildersuche Einreichen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Zur Sammlung hinzufügen