Pokemon Psyduck

Filaments Used: PLA BambuLab Basic Black PLA BambuLab Basic Blue Gray PLA BambuLab Basic Red PLA BambuLab Basic Yellow PLA BambuLab Basic Jade White Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Blue Gray At layer #11 (0.96mm) swap to Red At layer #12 (1.04mm) swap to Yellow At layer #17 (1.44mm) swap to Jade White for the rest. The Model is 200x400mm in size 2parts Simply attach it with some PLA glue, and you're done. You can find the matching Hueforge frame here. https://makerworld.com/en/models/2276100-picture-frame-400x200mm#profileId-2499464 You need a different size: Remember, if scaling is desired, modify only the x and y axes; the z-axis must remain unchanged. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.24mm and the Actual Thickness is 1.75942mm