Poker card box

This is a box that will fit any set of standard size playing cards. On the inside there is plenty of room for the fingers making it easy to pick up the cards and the bottom part is designed to lift the cards on one side so that you can easily get them all at once. It consist of three parts that you need to print, the actual box, the lid and the screw that will hold both together. I printed all parts at once on 0.15 resolution and the tolerance i used for the screw was just perfect. The lid is engraved and it looks really nice if you print with two colours like i did. The lid should be printed with the top (engraved) part facing the table and the screw should be printed vertically so the threads are printed correctly. This way no support is required, maybe brim on the screw just to be sure. I did not use brim either but my printer has heated table and I also used PETG which in general sticks better to the printing surface.