Thingiverse
Pole Rocker
von Dugx0r
5
Downloads
10
Likes
0
Makes
This is a variant of a traditional pole rocker for use in the mezzotint printmaking technique. The front plate has points for attaching a rocker blade. Rather than pivot from a fixed point, a back plate mimics the arc of the blade. The fully assembled rocker is designed to stay parallel to the horizontal plane. The entire assembly is designed to be compact, and easily assembled or disassembled for transport.
Front plate is universal, choose from the 4" or 6" back plate according to your blade.
Screw holes are sized for weight sets using 1/4" or M6 bolts
Routed to accommodate a 25mm or 1" wooden rod & PVC pipe.
Front plate is universal, choose from the 4" or 6" back plate according to your blade.
Screw holes are sized for weight sets using 1/4" or M6 bolts
Routed to accommodate a 25mm or 1" wooden rod & PVC pipe.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!