Thingiverse
Robotics
Model downloaden
Poleel 80x10mm
31
Downloads
36
Likes
0
Makes
## Design / Specs
Very similar to the Pololu 80x10mm wheels (see http://www.pololu.com/catalog/product/1434).
### Dimensions
Wheel is 76.5mm across (80mm with a "tire") and 10mm wide.
### Mounting Holes
The mounting holes are for 4-40 machine screws. The top and bottom holes are spaced 3/8" apart horizontally and 16.5mm apart vertically. The middle two mounting holes are 1/2" apart.
### Shaft Holes
The shaft hole is "D" shaped, 3.0mm in diameter with a flat 1.0mm away from the center of the hole.
## Manufacturing
I would suggest 3D printing these guys. If you can print support material print the Poleel80x10mm.STL. If not print 1X of each of the Poleel80x10mmTop.STL and Poleel80x10mmBottom.STL and then glue together.
Very similar to the Pololu 80x10mm wheels (see http://www.pololu.com/catalog/product/1434).
### Dimensions
Wheel is 76.5mm across (80mm with a "tire") and 10mm wide.
### Mounting Holes
The mounting holes are for 4-40 machine screws. The top and bottom holes are spaced 3/8" apart horizontally and 16.5mm apart vertically. The middle two mounting holes are 1/2" apart.
### Shaft Holes
The shaft hole is "D" shaped, 3.0mm in diameter with a flat 1.0mm away from the center of the hole.
## Manufacturing
I would suggest 3D printing these guys. If you can print support material print the Poleel80x10mm.STL. If not print 1X of each of the Poleel80x10mmTop.STL and Poleel80x10mmBottom.STL and then glue together.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
