Pontiac

Project: Pontiac.hfp Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in size You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.56mm and the Actual Thickness is 2.56mm #080a0d PLA PolyLite Black Transmission Distance: 0.3 #eb3b41 PLA Overture Matte Red Transmission Distance: 2.5 #ff7238 PLA Prusament Prusa Orange Transmission Distance: 6.6 #fce300 IMAGE Conversion #fce300 Transmission Distance: 6 #e2dedb PLA PolyLite White Transmission Distance: 5 This print uses 5 unique filaments !!!! It appears you have mixed filament types. Be certain this is what you want. !!!!! !!!! It appears you have Image Colors as Filaments. It will not be possible to print this. !!!!! Swap Instructions: Start with Black At layer #9 (0.8mm) swap to Red At layer #15 (1.28mm) swap to Prusa Orange At layer #19 (1.6mm) swap to Yellow At layer #24 (2mm) swap to White for the rest.