Thingiverse
Pooper Scooper Rake
di TeamOliva
14
Download
20
Likes
0
Makes
The wife went out and bought one of these "Pooper Scooper Combos" and the darn thing was over $30!!! I thought that was an outrageous amount!!!
Anyways, here is my version of the "Rake". You print it flat, then using a coffee can (or other round can) you heat the tines for a bit and shape them around the metal can to achieve the round shape. The first one I made, I just used the dowel to shape the tine ends.
Speaking of dowels, you will need a 3/4" wood or metal dowel, (I used an old handle from a broom), to complete this project. The length of the dowel is entirely up to you, I adjusted mine so I don't have to bend over while using it.
A little bit of glue, to stick both ends on, and you'll be all set.
Anyways, here is my version of the "Rake". You print it flat, then using a coffee can (or other round can) you heat the tines for a bit and shape them around the metal can to achieve the round shape. The first one I made, I just used the dowel to shape the tine ends.
Speaking of dowels, you will need a 3/4" wood or metal dowel, (I used an old handle from a broom), to complete this project. The length of the dowel is entirely up to you, I adjusted mine so I don't have to bend over while using it.
A little bit of glue, to stick both ends on, and you'll be all set.
TeamOliva pubblica anche su
200 modelli aggiuntivi su altre 1 piattaforme
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
