popeye

popeye the sailor man Project: popeye .hfp Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 113.14x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.3mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Basic Silver Transmission Distance: 0.5 PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 4 unique filaments Swap Instructions: Start with Black At layer #8 (0.8mm) swap to Blue Gray At layer #13 (1.04mm) swap to Silver At layer #20 (1.52mm) swap to Jade White for the rest.