Portable AC 2-hose conversion adapters

Adapters for turning a portable AC equipment into a 2-hose solution, increasing effectivity.

These adapters have been designed to suit a 150 mm exhaust hose, and a 160 mm inlet hose. The unit I used were a Deltaco Smart AC 9000 (SH-AC01), but other units with a 150 mm exhaust hose should work too.

The exhaust connector outer parts may be used to decrease the risk of debree coming into the hose when the unit is off. There is a "filter holder" that may be used to clamp a finer filter, preventing flies and such from getting into the hose. It's recommended to keep the restrictiveness low though, as not to effect the effectiveness of the unit too much.
The hose screws into the adapter, and the ridges in the adapter thus will need support to print well.

The inlet hose I used were a 160 mm aluminium stretch duct (https://www.biltema.se/en-se/construction/hvac/ventilation/ventilation-hoses/alu-ventilation-duct-2000040328), which is glued in the connectors which then is screwed to you