Slicer Discord
portable battery fan – 3D printable model from Thingiverse Thingiverse
portable battery fan – Bild 1 portable battery fan – Bild 2 portable battery fan – Bild 3 portable battery fan – Bild 4 portable battery fan – Bild 5 portable battery fan – Bild 6

portable battery fan

by MikleVV
188 Downloads
193 Likes
1 Makes
Go to Model
Portable battery fan.
Powered by either a single 18650 battery or a 5V source.
Has three operating speeds.
A fully charged 2500mAh battery operates for about 5 hours at maximum speed.
The control board used charges the battery itself, monitors its health and has overload protection in case of accidental blocking of the fan.
The electric motor used has reliable brushes that do not burn out when the fan jams.

I tested several propellers taken from the sources below.
https://github.com/RaulBejarano/Ultimate-Toroidal-Propeller-Generator
https://www.thingiverse.com/thing:5300828/files
https://www.thingiverse.com/thing:3874607

Unfortunately, I was not able to make a silent propeller. I would be grateful if someone more experienced in aerodynamics than me could make a quiet propeller for this fan.

The fastening of the two parts of the fan to each other is borrowed from the modular system from here https://www.thingiverse.com/thing:2194278

Printed without supports, does
Source
Thingiverse
What you need to print this: Intermediate Medium confidence
Why?
no supports
Support-free
Supports 0/3
Assembly 2/3
Settings 1/3
Bed size 0/3
Post-process 1/3
Printer
FDM / FFF
File format
STL
Material
Est. print time
5 h
Post-processing
Gluing
Software
Cura, PrusaSlicer, or similar
Frequently Asked Questions
Does portable battery fan need supports when printing?
No supports needed for portable battery fan — it's designed to print clean off the bed.
How long does it take to print portable battery fan?
According to the design notes, portable battery fan takes approximately 5 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.
What file format is portable battery fan available in?
portable battery fan is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through Thingiverse.
Is portable battery fan free to download?
Yes, portable battery fan is available as a free download through Thingiverse. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.
No ratings yet
No comments yet – be the first!
Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Add to Collection