Portable Microscope

Disassembled portable microscope
You need to print six pillars and one of each of the other parts.
• Attach three pillars each to the base and roof using screws. Then, fit the stage in place.
• Insert the lens tube into the roof using the screw.
• Focus by rotating the lens tube to adjust the height.
• The lens tube is compatible with RMS objective lenses and 23.2mm eyepieces.
Compatible Accessories:
• RMS objective lens
• 23.2mm eyepieces
• Condenser Lens: https://amzn.asia/d/7jrS0H7
• Mechanical Stage:https://amzn.asia/d/8oNGUQ2
• LED Light: https://amzn.asia/d/8oNGUQ2
The above parts can be attached to the microscope.

230521
The lens tube screw has been changed from a triangular screw to a trapezoidal screw. This has reduced the maximum value of blurring during focus adjustment.
However, the overhangs have increased and printing has become more difficult, so the data from the previous version is tentatively retained.

A PDF summarizing assembly and operation, as well as a detaile