Portable tak board

This is a set of STLS for printing a small and portable tak board and its pieces.
it has 2 versions, a magnetic one and a non magnetic one.

3mmx6mm round neodymium magnets

36 for the 6x6 board

25 for the 5x5 board

20 for the snappers-closers

2 for the capstones

120 for the normal pieces

total of:203 magnets

(I included a non-magnetic version that uses fabric ribbon or tape as hinges that has no holes on the pieces and on the board "sides". It has a channel for the hinges. I personally like the snappyness of the magnets, but you do you)


Tips for finishing and assembly

It’s a good idea to have a hair dryer or heat gun on hand to shape the magnet holes precisely.
Gently heat the area around the hole, insert the magnet, let it cool, and then remove it.
Repeat this process until the fit feels perfect.

Once everything fits snugly, use epoxy or another strong adhesive to secure the magnets in place.


For covering the outer surface of the board, you have a few options:

You can 3D