Thingiverse
PortablePi
by jet_
17
Downloads
10
Likes
0
Makes
This is a test to create a portable raspberry pi zero with a screen:
RTC: https://www.adafruit.com/products/3013
Battery LiPo 2500mAh: https://www.adafruit.com/products/328
10 DOF: https://www.adafruit.com/products/1604
2x Neopixel stick: https://www.adafruit.com/products/1426
480x320 3.5'' TFT + Touchscreen: https://www.adafruit.com/products/2097
PowerBoost 500 Charger: https://www.adafruit.com/products/1944
Power switch: https://www.adafruit.com/products/805
USB Type-A Jack: https://www.adafruit.com/products/2225
Pi Zero
Everything fit in it, but I didn't have time yet to souder the wires. It might be complicated. I also don't know if the battery will not get too hot inside the box.
RTC: https://www.adafruit.com/products/3013
Battery LiPo 2500mAh: https://www.adafruit.com/products/328
10 DOF: https://www.adafruit.com/products/1604
2x Neopixel stick: https://www.adafruit.com/products/1426
480x320 3.5'' TFT + Touchscreen: https://www.adafruit.com/products/2097
PowerBoost 500 Charger: https://www.adafruit.com/products/1944
Power switch: https://www.adafruit.com/products/805
USB Type-A Jack: https://www.adafruit.com/products/2225
Pi Zero
Everything fit in it, but I didn't have time yet to souder the wires. It might be complicated. I also don't know if the battery will not get too hot inside the box.
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
