Portal Hueforge

AMS is not needed. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in size Filaments Used: PLA Black Transmission (Distance: 0.6) PLA Dark Gray Transmission (Distance: 1.8) PLA Light Gray Transmission (Distance: 0.5) PLA White Transmission (Distance: 3.5) Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Dark Gray At layer #16 (1.36mm) swap to Light Gray At layer #21 (1.76mm) swap to White for the rest.