Portal Illusion

I was inspired by the video made by Steve Mould.I decided to make it with 4 core spirals to add to the effect more. Each is printed separately and in different colors. AssemblyFirst, take the base and put the bottom disc (the one with big circles with notches) into it).Put each spiral into its slots (they only fit into one of the holes each), and hold them with your hand as their balance is going to be off. Optionally, you can glue them in place, but they stay in place after the assembly is finished regardless. If you do happen to glue them, be sure that the next step, putting the handle on it, is still possible, as the alignment might be off if done incorrectly. Also, make sure not to glue the alignment discs to the base or the cap, as that will stop it from spinning.Put the handle on them, it might be easier to do them separetely by lifting each one by one or by doing them all at once when aligned perfectly. Make sure that the handle passes through the colums on the base through the