PortaPi (Portable Raspberry Pi Zero Cyberdeck)

This is my latest project I am dubbing the “PortaPi” made out of parts I had laying around. This is definitely not as polished as I would like but it is functional. Print with supports for the ports and the switch. To assemble I ended up drilling holes for the screws that hold the case together.It consists of:Raspberry Pi Zero WWaveshare 2 inch LCDSolderparty BBQ20KBDAdafruit MicroLipoDC Boost Module1200mAh BatteryToggle SwitchSome Tips:The pegs that the boards sit on inside the case are designed to be melted down with a soldering iron to hold them in place.The toggle switch I am using can be replaced with any kind of simple switch, this one I just had on hand.The boost module is there to boost the battery's power from 4.2v to 5.0v so the Pi is functional.The toggle switch does not act as a safe shutdown, it merely just cuts power from the MicroLipo to the boost module.Some basic instructions for wiring: The battery connects to the MicroLipo, then to the toggle switch, then to the