posable steampunk led lamp

POSABLE STEAMPUNK LAMP WITH BAMBULAB KIT 001   WARING: -THE FIRST PLATE IS A TOLERANCE TEST. PRINT IT AND IF BOLT AND NUT FITS, GO AHEAD. OTHERWISE YOU NEED TO SCALE THE NUTS. better results with PETG most of the parts are press fitted or go in place with screw and nuts. you will need to glue the lamp to the base and if the bolts and nuts put a little bit of glue put in the 2 little gear connected to the main gear to make sure it transmits movement    Secure led panel with tape on the back or a little bit of glue Assembling Guide   every nut is the same, only the bolts change put a washer on each bolt head and each nut I will not indicate for each step which bolt and which spacer to use in assembly, for reference download the "assembly guide" print profile, there each bolt and each spacer are colored differently and in thàe assembly view you can see where they go. Just check which element to use and align all the pieces in order of length in order to assign the right color to each one (as you see in the pictures below)   This guide is "work in progress". I'm modifying the print profiles to assign to each object the name that you will find in this guide. for now you will have to identify them by sight, as I update the print profile and the guide, the name of the pieces in the guide in bold italics you will find them as the name of the individual objects in the 3mf file   let's start!   first assemble the lamp holder and install the 001 kit by sliding the wire into the appropriate slot and secure them with the dark grey Bolts. these are the only nuts that don't need washers assemble the base parts (base pt1, base pt2 and base pt3) (don't glue anything for the moment, assemble everything dry first, if everything works correctly then you can glue)   assemble the main gear by placing the olive green bolt in its socket. It should fit but if it's too loose you can use a little glue choose a side between right and left and start assembling. First you will need to connect th