Poseidon Hueforge

The minis love this one and are enjoying making themNot for commercial useProject: posidon.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 150x150mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mmFilaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA PolyLite Grey Transmission Distance: 1 PLA PolyLite White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #6 (0.72mm) swap to Blue Gray At layer #11 (1.12mm) swap to Grey At layer #16 (1.68mm) swap to White for the rest. not for commercial use