Thingiverse
Positive Polyhedral Dice Mold
door _Mari_Makes_
1.9k
Downloads
1.3k
Likes
2
Makes
This mold can be used to create silicone molds which can be used to create Handcrafted DnD Dice. The design is inspired by a video about dice making from Die Würfelschmiede. Edit: He uploaded his design https://www.thingiverse.com/thing:3828391
Print the model with the flat side down, the model does not need to be printed with support to reach create the mold since the top layers will touch the silicone.
Attach a die with hot glue to the peg. Place the peg inside the mold. The molds do not fit together perfectly, please apply painters tape to the sides of the mold to prevent the silicone from leaking.
First, pour the silicone into the mold and wait for it to cure. Remove the peg and cut out the original die. Turn the mold upside down and pour the epoxy resin into the mold. There is no way for the air to escape so it helps to massage the mod when filling it to help the air escape.
Edit: New version, slightly bigger, way better fit especially if you print it with Cura's Eng
Print the model with the flat side down, the model does not need to be printed with support to reach create the mold since the top layers will touch the silicone.
Attach a die with hot glue to the peg. Place the peg inside the mold. The molds do not fit together perfectly, please apply painters tape to the sides of the mold to prevent the silicone from leaking.
First, pour the silicone into the mold and wait for it to cure. Remove the peg and cut out the original die. Turn the mold upside down and pour the epoxy resin into the mold. There is no way for the air to escape so it helps to massage the mod when filling it to help the air escape.
Edit: New version, slightly bigger, way better fit especially if you print it with Cura's Eng
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
