Potion Explosion - Organizer plus expansions

This organizer is designed to print with a .8 nozzle .4 and .2 will work fine as well. The box is extremely tight. I've allowed about 1mm play between all the boxes so make sure you have esteps and flow correct. Your printed walls should be 1.6mm thick.

Unfortunately the plastic dispensers in Potion Explosion are larger than half of the core game box so this organizer will fit everything from 5th ingredient and 6th student but the second dispenser. You will need to maintain the 6th student box to carry the second dispenser. There is room for additional expansions as well should they come out. I've included a top of dispenser tray that is not necessary to print but gives some future proofing if there is another expansion.

Print one of each of the following.
Station Tray
Component Tray
Potion Tray

It is not needed to print he Cauldron Tray but you can if you would like too, it is sloped and sits on top the dispenser. The Component Tray is with 1mm less width so that it do