Slicer Discord
Pourable Perforated Trays – 3D-Druckmodell von Thingiverse Thingiverse

Pourable Perforated Trays

von smbaker
29 Downloads
25 Likes
0 Makes
Zum Modell
I originally designed these as a way to dry bulk desiccant granules in my food dehydrator, however they still came out a little too small to hold much desiccant so I abandoned. Nevertheless, they might be useful to someone for some other purpose. The versions I printed are slightly different from the STL I've uploaded as I made a few improvements to the design after the print. My goal was that 3mm desiccant would not fall through a hole, so I'm pretty sure I sized the holes close to 2mm.

Supports needed on the "shallow" containers, as the ramp is at 22.5 degrees. The ramp on the "deep" container was designed to be 45 degrees to avoid the need for supports. I recommend the deep container.
Quelle
Thingiverse
Was du zum Drucken brauchst: Mittel Niedrige Konfidenz
Warum?
Supports nötig
Einteilig Supports nötig
Supports 2/3
Zusammenbau 0/3
Einstellungen 1/3
Druckbett 0/3
Nachbearbeitung 0/3
Drucker
FDM / FFF
Dateiformat
STL
Material
Software
Cura, PrusaSlicer o. Ä.
Noch keine Bewertungen
Noch keine Kommentare – sei der Erste!
Feed Blog Slicer Kostenrechner Bildersuche Einreichen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Zur Sammlung hinzufügen