Pouring Stand

A pouring stand suitable for resin, silicone, and other materials that require a vertical mold. The base and head interlock with 4 supports through grooves, ensuring the stand remains level. The head is grooved at the top to allow for the interchangeable use of three different-sized rings at any time to accommodate three mold diameter sizes (90mm, 105mm, or 130mm) and a length of 225mm Dimensions: H22.5cm (8.85inch), L 20.5cm (8.07inch) To print the full stand you need: 1x Interlocking Base, 1x Interlocking Head, 4x Support, 1x 90mm Ring, 1x 105mm ring and 1x 130mm ring. You can add a drop of superglue to the supports if you like, we did not and it works. Few data: Printed with Kobra 3 Combo Slicer: Tested with Both Orca and Anycubic slicers Filament: Polymaker Polyterra PLA+ Temperatures: Nozzle 215c - Bed 65c (temperatures are celsius) Flow Rate: 0.95 Layer: 0.2 First Layer Speed 50 First Layer Infill 50 First Layer Acceleration 1000 Infill: Gyroid 30% Print Time with the above parameters:  Interlocking Base: 1h26m Interlocking Head: 3h05m Support: 1h5m each. (4x support on same plate 4h23m) Ring 90mm (3.54 inch): 58m30s Ring 105mm (4.1 inch): 47m45 Ring 130mm: (5.1 inch) 26m3s