POW MIA

If you would like to thank me or support me with a one-time donation, or if you are interested in selling physical prints of my models, check out: https://buymeacoffee.com/heyben POW MIA Logo Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Base Thickness of 1.12mmThe Max allowed Thickness is 3.84mm and the Actual Thickness is 2mm Filaments Used: #000000 PLA BambuLab Basic Black Transmission Distance: 0.2 #ffffff PLA BambuLab Basic Jade White Transmission Distance: 5.8This print uses 2 unique filaments ***attached .3mf file prints the first 4 layers at 0.24mm then the rest at 0.08mm for faster print time******the layer numbers will be different but the layer height will be the same*** Swap Instructions: Start with Black At layer #3 (1.28mm) swap to Jade White for the rest. Check out my US Flags & Military Collection here <img class="image_resized" style="height: auto; width: 200.2