Powder Dispenser

My design for a linear bar powder measure. The slide and slide body are a tight fit. But need to be so that powder does not bypass the "measure" cavity. It used an old soap bottle for hopper. I've also included a Walmart Peanut Jar hopper adapter also. The drop spout is an RCBS type. There are several on thingiverse that will fit (uniflow powder measure).

You will also need 1/4 - 20 rod/screw about 5" long for the measure adjustments.

Also included are 3 quick adjust "saddles" that are labeled for W231_5.1GR, BlueDoT 6.2gr, and Unique 5.1 Gr.

I have reloaded well over 500 rounds or 9mm with this. It measures as precisely as my RCBS uniflow even with small flake powder.

Hope this helps someone out.


Pictures: https://photos.app.goo.gl/NxZ2SgdGaUmGf4ca8


For the slide and slide body, I used 98% infill and printed very slowly (45). This was made with eSun PLA +

I made lever knob and lever fulcrum to be 1/4x20, but all those holes are tight and will need to be ch