Thingiverse

Power Entry Switch Box

door meie1kyl

54 Downloads

46 Likes

0 Makes

This switch box can be used for anything that uses a standard C13 / C14 power entry. I'm using it to switch the power brick for my Prusa i3. The holes near the bottom can be used to zip tie the enclosure to another object. The components need to be wired together before inserting into the box as there is no lid or other openings. I only switched the live wire, neutral and ground are wired directly to the output socket.

I used the following components:

Quantity 1 each
[Q226-ND](http://www.digikey.com/short/3w497j)
[Q209-ND](http://www.digikey.com/short/3w497b)
[Q947-ND](http://www.digikey.com/short/3w497n)
[EG1509-ND](https://www.digikey.com/short/3w49n8)
[Any of these switches will also work](https://www.digikey.com/short/3wmpcm)

I soldered all the connections but crimped quick connect terminals can be used as well. See [A27817-ND](http://www.digikey.com/short/3w493m) for 18-22AWG or [A27824-ND](http://www.digikey.com/short/3w49qq) for 14-16AWG.

c13 c14 Hephestos power Power Cord power socket power supply power switch prusa prusa i3 prusa i3 hephestos switch switch mount c13 c14 Hephestos power Power Cord power socket power supply power switch prusa prusa i3 prusa i3 hephestos switch switch mount c13 c14 Hephestos power Power Cord power socket power supply power switch prusa prusa i3 prusa i3 hephestos switch switch mount

Bron

Thingiverse

Wat je nodig hebt om te printen: Beginner Lage betrouwbaarheid

Eendelig

Supports 1/3

Montage 0/3

Instellingen 1/3

Bedgrootte 0/3

Nabewerking 0/3

Printer

FDM / FFF

Bestandsformaat