Power getting to Work

DescriptionWorld of GLT 3d Vous propose : Boost MeHappy printing! Don't hesitate to give it a like and Boost it encourages my work ;-) Project: Power getting to workPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Base Thickness of 1.52mmThe Max allowed Thickness is 4.32mm and the Actual Thickness is 3.28mm Filaments Used: #080a0d PLA PolyLite Black Transmission Distance: 0.3 #4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 3 #c00d1e PLA BambuLab Basic Red Transmission Distance: 4 #e2dedb PLA PolyLite White Transmission Distance: 5 This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #23 (1.92mm) swap to Blue Gray At layer #26 (2.16mm) swap to Red At layer #33 (2.72mm) swap to White for the rest. Weighed approximately 96g in 3h35. Spécial Thank ! Best Designer : kfsosser98 / DEVIANTART25 / Thank you for this stunning photo, a true work of a