Thingiverse
Power Grid Insert
por brettmcgin
358
Descargas
159
Likes
4
Makes
# Better Board Game Inserts
# Parts to Print
- 1 of every file (the spacer arm is optional but recommended)
- Print 6x Player Containers
Please make sure to print the spacer on its top (no supports should be needed)
## Guiding Principles
- Board game pieces should stay put no matter the orientation of the box
- No Bags!
- Use as little filament as possible
- Use supports only when necessary
## The Inserts
- Each piece should be printed separately and then assembled after.
## Desgin
- These were designed using Onshape [here](https://cad.onshape.com/documents/7737b1f65d14141510a4f0d2/w/7708e5f58df199896e72e0df/e/eccc7f8345da650b9eaa95ff).
- Additionally these were made from a board game inserts framework I built [here](https://cad.onshape.com/documents/01f4f5c7b4093f0c0d968461/w/5411319c42e25fc60f581269/e/71eaf33b0aa3b96ffbea2c01).
## Support
If you like this design and want to help out, please consider sending a coffee my way. Thank you for the support!
B
# Parts to Print
- 1 of every file (the spacer arm is optional but recommended)
- Print 6x Player Containers
Please make sure to print the spacer on its top (no supports should be needed)
## Guiding Principles
- Board game pieces should stay put no matter the orientation of the box
- No Bags!
- Use as little filament as possible
- Use supports only when necessary
## The Inserts
- Each piece should be printed separately and then assembled after.
## Desgin
- These were designed using Onshape [here](https://cad.onshape.com/documents/7737b1f65d14141510a4f0d2/w/7708e5f58df199896e72e0df/e/eccc7f8345da650b9eaa95ff).
- Additionally these were made from a board game inserts framework I built [here](https://cad.onshape.com/documents/01f4f5c7b4093f0c0d968461/w/5411319c42e25fc60f581269/e/71eaf33b0aa3b96ffbea2c01).
## Support
If you like this design and want to help out, please consider sending a coffee my way. Thank you for the support!
B
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!