power (hueforge)

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Orange Transmission Distance: 5 PLA BambuLab Basic Jade White Transmission Distance: 5Swap Instructions: Start with Black At layer #11 (0.96mm) swap to Red At layer #22 (1.84mm) swap to Orange At layer #26 (2.16mm) swap to Jade White for the rest.