Power Pads

Power Pads inspired by the Grizzla Sync, I also made a smaller model for the Nosfet Aero

My settings:

- Elegoo Neptune 3 Plus
- TPU 95A
- 2 Perimeters, 1mm width , 0.8mm nozzle
- 10% Gyroid Infill Harder Pads / 6% Infill softer pads
- 0.35mm layer height
- 30mm/s / 12mm/s small perimeters
- 50c bed / 220c nozzle
- Use a 5mm brim around the part to avoid parts warping and improve bed adhesion