Thingiverse
Power Plug for BLV mgn Cube + Multimaterial
von senzinka
44
Downloads
25
Likes
0
Makes
Remix of https://www.thingiverse.com/thing:3734786 to accommodate frame corner plates.
Thinned out to 4mm to match the plate height and changed fillet to chamfer for visuals and easier printing.
Can be used in the back and on the sides.
Two mirrored versions depending on the required location.
Cover split for multimaterial printing, also included the original one.
Update (19.05.2020): Added three sizes with nut slots. Depths are the standard 30mm, also 37mm to match extrusion width (cover is additional 3mm) and 55mm for those stiff kit wires.
Thinned out to 4mm to match the plate height and changed fillet to chamfer for visuals and easier printing.
Can be used in the back and on the sides.
Two mirrored versions depending on the required location.
Cover split for multimaterial printing, also included the original one.
Update (19.05.2020): Added three sizes with nut slots. Depths are the standard 30mm, also 37mm to match extrusion width (cover is additional 3mm) and 55mm for those stiff kit wires.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
