Slicer Discord
PowerPole locks / mounts / strain relief – 3D printable model from MakerWorld MakerWorld
Electronics

PowerPole locks / mounts / strain relief

25 Downloads
6 Likes
6 Makes
Go to Model
I've included the Fusion .f3d file so you can remix with less hassle. I designed these Anderson PowerPole connector locks to be stronger and more versatile than the others I've seen shared. There are four variants:Very secure wall / backplate / project board mountSame but with integrated guide slots for strain relief using zip ties (version that looks like a “T”)Minimalist connector lock with mountAbsolute minimal connector lock, similar to the official Anderson connector lockIt's critical to print the small thin legs in a horizontal orientation for strength. These are designed to be printed in the correct orientation and still adhere to the bed. I've verified them with 0.4 and 0.6mm nozzles. I've tested these in many filaments. PC, PETG, and PA are the best. Cyrogrip Pro Glacier (no glue) and the Smooth High Temp plate with light liquid glue give the best results. Friendly reminder that lower layer heights are slightly less strong and exacerbate warping in filament
Category
Electronics
Source
MakerWorld
Published
Updated
What you need to print this: Intermediate Low confidence
Why?
significant post-processing
Single piece
Supports 1/3
Assembly 0/3
Settings 1/3
Bed size 0/3
Post-process 2/3
Printer
FDM / FFF
File format
STL
Material
PLA, ABS, PETG
Post-processing
Sanding, Gluing
Software
Cura, PrusaSlicer, or similar
No ratings yet
No comments yet – be the first!

Similar Models

3 Suggestions
Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Add to Collection