Cults3D
Art
Zum Modell
Praying Mantis
717
Downloads
56
Likes
0
Makes
Praying mantis
11/18 Mesh is now complete. All parts should interconnect at the uploaded size with a .5mm tolerance which will increase as you upscale(easily solved with duct tape and chewing gum).
9/18 All parts uploaded. not yet printed or checked for manifold issues.
8/18 Mesh is now being reworked and parts being uploaded once completed. Higher poly count, smoother edges, more detail, individual parts.
Notes: Hair parts, palps and antennae may be easier to form by hand due to size. Heat manually until pliable.
Legs will need a good support system.
0.1 layer height ideally
11/18 Mesh is now complete. All parts should interconnect at the uploaded size with a .5mm tolerance which will increase as you upscale(easily solved with duct tape and chewing gum).
9/18 All parts uploaded. not yet printed or checked for manifold issues.
8/18 Mesh is now being reworked and parts being uploaded once completed. Higher poly count, smoother edges, more detail, individual parts.
Notes: Hair parts, palps and antennae may be easier to form by hand due to size. Heat manually until pliable.
Legs will need a good support system.
0.1 layer height ideally
dazzadazzadazzadazza veröffentlicht auch auf
52 zusätzliche Modelle auf 1 weiteren Plattformen
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
