Thingiverse
Precision Prusa, w/Modular Hemera X-Axis
by bmxorcist
8
Downloads
11
Likes
0
Makes
Precision Prusa with linear rails, lead screws, and modular Hemera-based X-Carriage!
NO MORE BELTS!!!
Upgrade your Prusa (or other printer) to linear rails and lead screws for EXTREME ACCURACY!!
Can't decide what hot-end to use? Neither can I!
Use 1 OR 2 Hemera's (native support), direct drive, bowden, Bed level sensor, or mix and match! Its only a few bolts away with this simple modular X-Carriage. The two-sided x-carriage is designed to bolt directly to the Hemera extruder, but it will accept anything you can think up... Bolt pattern is 34 mm x 34 mm, M3 10 mm. Plate face is 40 mm x 40 mm. (See drawing)
My mount plate designs (shown) can be found here --> https://www.thingiverse.com/thing:4064655
My build uses Sensor-less homing, but if you use end-stops, this features an easy adjustment of X and Z end-stops with just a turn of a screw (designed for regular sub-micro switches or the red boards found on amazon(pictured). Just use the files marked "Z-MotorMount_LeftwZsens
NO MORE BELTS!!!
Upgrade your Prusa (or other printer) to linear rails and lead screws for EXTREME ACCURACY!!
Can't decide what hot-end to use? Neither can I!
Use 1 OR 2 Hemera's (native support), direct drive, bowden, Bed level sensor, or mix and match! Its only a few bolts away with this simple modular X-Carriage. The two-sided x-carriage is designed to bolt directly to the Hemera extruder, but it will accept anything you can think up... Bolt pattern is 34 mm x 34 mm, M3 10 mm. Plate face is 40 mm x 40 mm. (See drawing)
My mount plate designs (shown) can be found here --> https://www.thingiverse.com/thing:4064655
My build uses Sensor-less homing, but if you use end-stops, this features an easy adjustment of X and Z end-stops with just a turn of a screw (designed for regular sub-micro switches or the red boards found on amazon(pictured). Just use the files marked "Z-MotorMount_LeftwZsens
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
