Pride - Hueforge 220x189

Print Instruction : Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x172.13mm in size You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 3.2mm and the Actual Thickness is 3.12mm Filaments Used: PLA BambuLab Basic Red Transmission Distance: 3.9 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA BambuLab Basic Jade White Transmission Distance: 5.9 PLA BambuLab Basic BambuLab Green Transmission Distance: 2 PLA BambuLab Basic Cyan Transmission Distance: 2 PLA BambuLab Basic Purple Transmission Distance: 1.6 PLA BambuLab Basic Blue Transmission Distance: 2.9 PLA BambuLab Matte Dark Blue Transmission Distance: 1 This print uses 8 unique filaments Swap Instructions: Start with Red At layer #6 (0.56mm) swap to Yellow At layer #8 (0.72mm) swap to Jade White At layer #9 (0.8mm) swap to Yellow At layer #16 (1.36mm) swap to BambuLab Green At layer #18 (1.52mm) swap to Jade White At layer #20 (1.68