Thingiverse
Principled PLA Turntable
door TheOriginalIntreeg
0
Downloads
0
Likes
0
Makes
Warning: Untested prototype.
Synopsis: I wanted to make a turn table that would work easily with PLA and print all in one go.
Credit: Attributed from Ipsis's Quick Shoe Ties at https://www.thingiverse.com/thing:1230926 and Maxstupo's Bearing Generator at https://www.printables.com/model/230892-bearing-generator.
Print Estimate: 8 hours, 50g
Assembly: Twist the base pieces together, seat the bearing on the center post, and mount the plate's socket onto the bearing. Finish by pasting paper to the plate and trimming the edges of the paper off with a pair of scissors. Please store this disassembled with the plate upside down to prevent warping.
Synopsis: I wanted to make a turn table that would work easily with PLA and print all in one go.
Credit: Attributed from Ipsis's Quick Shoe Ties at https://www.thingiverse.com/thing:1230926 and Maxstupo's Bearing Generator at https://www.printables.com/model/230892-bearing-generator.
Print Estimate: 8 hours, 50g
Assembly: Twist the base pieces together, seat the bearing on the center post, and mount the plate's socket onto the bearing. Finish by pasting paper to the plate and trimming the edges of the paper off with a pair of scissors. Please store this disassembled with the plate upside down to prevent warping.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
