Thingiverse
Printable Bed Leveling Feeler Gauge
door AlexFlamand
128
Downloads
75
Likes
0
Makes
This is a set of printable, labeled feeler gauges that can be used for leveling the bed of your printer. All printers eventually get out of level. These are meant to be printed *before* that happens so that you can properly distance the nozzle from the bed in a location without having to use a sheet of paper to estimate the distance, and without having to buy a set of feeler gauges. A few suggestions:
1. Only use these when the hotend is cold to prevent warping or damage to the gauge.
2. Only try to print these if you know 100% that your bed is level already.
3. Always verify the thickness of the gauges with a pair of calipers or a micrometer before using them.
1. Only use these when the hotend is cold to prevent warping or damage to the gauge.
2. Only try to print these if you know 100% that your bed is level already.
3. Always verify the thickness of the gauges with a pair of calipers or a micrometer before using them.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!