Printable DSLR Mirrorless Camera Tripod

SummaryI was not happy with what else was available to print so I designed and made my own. IMO It's much better and printed in about 3hrs on a Bambu A1 mini. Pictured with a 375g body and a 300gr lens. Base: 0.16, 2.4mm walls, 20% infillLegs: 0.08-0.2 adaptive, 3 walls, 15% infillPLA if you don't intend to let it bake in the sun.Key Features:1) Sits flat even when back legs are removed2) 46.2* of tilt available3) Rigid mechanical lock at full extents of range4) Lightweight5) Designed around FDM print "limitations"6) Only 4 screws needed!1x 1/4-20x 1.75"2x 1/4-20x 3/4"1x 1/4-20x 1/2"2x 1/4-20 Hex nuts (You could print these as well or modify the base to be tapped. I included a step file. Remove thehex and reduce the thru hole to be .205")-You can buy 4x 1.75" ones and trim them to length via dremel or hacksaw-You can also use 3x D-ring tripod screws if you'd like to make this tool-less.In my province, it's easiest to buy a 5 pack of 2." &