Slicer Discord
Printable Pop Filter for Your Microphone – Modelo 3D imprimible de MakerWorld MakerWorld
Gadgets

Printable Pop Filter for Your Microphone

260 Descargas
78 Likes
105 Makes
Ver Modelo
The base part that clips onto the Samson G-Track Pro microphone can be found here: https://www.printables.com/model/219694-samson-g-track-pro-pop-filter Otherwise, you can remix your own adapter base for your microphone. I have a clunky cloth pop filter on a goose neck that's way bigger than it needs to be - it's going in the bin now. Print settings: Import the frame and infill parts together so they are aligned. The infill part should have no walls and no top/bottom. For the infill, try 25% gyroid for light attenuation, higher % for heavy attenuation (if you like talking real close to the mic). You can also scale the infill portion in the Z direction to make it thicker and attenuate more if you need it. The infill part In the first picture uses 25% gyroid infill at 0.15mm layer height and is 5mm thick. The infill part in the second picture uses 25% gyroid infill at 0.25mm layer height and is 2mm thick. If you use Bambu Studio or Orca Slicer and want to have a 2-tone one similar to min
Categoría
Gadgets
Fuente
MakerWorld
Publicado
Actualizado
Lo que necesitas para imprimir: Principiante Baja confianza
¿Por qué?
capas de 0.15mm
Pieza única
Soportes 1/3
Ensamblaje 0/3
Ajustes 1/3
Tamaño de cama 0/3
Postproceso 0/3
Impresora
FDM / FFF
Formato de archivo
STL
Material
Altura de capa
0.15 mm
Software
Cura, PrusaSlicer o similar
Mismo diseñador, más plataformas

KYZ Design también publica en

51 modelos adicionales en 1 plataformas más

Verificado por coincidencia de títulos de modelos entre plataformas.
Aún no hay valoraciones
Aún no hay comentarios – ¡sé el primero!

Modelos similares

6 Sugerencias
Feed Blog Slicer Calculadora Búsqueda por imagen Enviar Contacto Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Añadir a colección