Thingiverse
Printed - 3D Puzzle Eagle
von dethcookie
1k
Downloads
806
Likes
15
Makes
This is a Remix of the LaserCut - 3D Puzzle Eagle located here:
http://www.thingiverse.com/thing:30990
(All credit for this design goes to jtronics)
I really wanted to print this, so I took the .dxf file provided by jtronics (see link above) and imported it into Blender 3d and added depth.
It took a bit of tinkering to find the right thickness. I found that 1.35mm fit together perfect for my printer. If it doesn't for you, you'll probably have to adjust the thickness manually like I did.
Another good thing about 1.35mm is that I can print at .27mm layer height and get exactly 5 layers. Also, I printed at 100% infill
http://www.thingiverse.com/thing:30990
(All credit for this design goes to jtronics)
I really wanted to print this, so I took the .dxf file provided by jtronics (see link above) and imported it into Blender 3d and added depth.
It took a bit of tinkering to find the right thickness. I found that 1.35mm fit together perfect for my printer. If it doesn't for you, you'll probably have to adjust the thickness manually like I did.
Another good thing about 1.35mm is that I can print at .27mm layer height and get exactly 5 layers. Also, I printed at 100% infill
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
