Printer Cabinet

I made a cabinet for my printer in order to help maintain heat. It has a light inside, webcam and window in the door. In the top, there is the bushing that I designed.

A lot more people have taken interest in this cabinet than i thought they would. I will give you a run down on the specs and measurements.

All panels are luan ply from Lowes hardware, some people call it door core; it's the cheap stuff, $2.98 per 24" x 24" sheet, I bought 6. I went with this because I can't fit a full 48" x 96" sheet in my car. Wood is 2" x 1" fir strips, once again the cheap stuff. Dig though what they have and you will be able to find pieces with little or no knots in them, plus being fairly straight helps. Most of my pieces had 1 or 2 knots in the ends, since all cuts are at a 45, the knots were not a problem. Lexan I had at home, varnish, piano hinge and a bunch of screws

Dimensions:

Bottom - 19" x 22"
With the 1 x 2's on the bottom, that creates a 3/4" high pocket, 1