Slicer Discord
Printrbot Simple Metal Raspberry Pi Case – 3D-Druckmodell von Thingiverse Thingiverse

Printrbot Simple Metal Raspberry Pi Case

14 Downloads
10 Likes
0 Makes
Zum Modell
I wanted to mount my Raspberry Pi on my Printerbot and have a box where all the cables come together. Also I have a heated printbed, so I needed a bigger power supply. So I modified an old XBOX brick, that connects at the top right and passes through the box to the printer. I connected a 12V to 5V converter to this line to power the raspi. There are also holes for the raspi camera cable, a cable to power the external LEDs for the camera (see other thing), and a on/off switch.

To attach the lid to the case, I used thread inserts in the case. You should be able to just use screws.
Quelle
Thingiverse
Was du zum Drucken brauchst: Mittel Niedrige Konfidenz
Einteilig Hardware nötig
Supports 1/3
Zusammenbau 0/3
Einstellungen 1/3
Druckbett 0/3
Nachbearbeitung 1/3
Drucker
FDM / FFF
Dateiformat
STL
Material
Nachbearbeitung
Hardware
Software
Cura, PrusaSlicer o. Ä.
Noch keine Bewertungen
Noch keine Kommentare – sei der Erste!

Ähnliche Modelle

6 Vorschläge
Feed Blog Slicer Kostenrechner Bildersuche Einreichen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Zur Sammlung hinzufügen