Prism Survey Pole Tip

This is a survey pole tip. 5/8"-11 for the pole end and 1/4"-20 for the ground end, so you can put a sharpened bolt in the tip. This was printed out of ABS with a .3 nozzle. 75% infill, 245 degrees. I also had to upscale the part to 105% so that it would fit (my printer isn't perfectly calibrated). You will have to run a tap through the 1/4-20 end to clean them up because the threads are kind of fine for a 3D printer, unless yours is dialed in perfect.