prismal • desk lamp

prismal · desk lamp a sleek, modular desk lamp designed for mood lighting in workspace environments.    this compact design features a minimalist base with an inner white shade and outer shade that mirrors the base colour with elegant vertical patterning.    designed for low-heat LED bulbs (max 25w) to ensure optimal performance, longevity, and safety. perfect for desktop workspaces, offering focused illumination with a sophisticated presence.     important · make sure that: your filament is dry and calibrated your build plate is properly clean so that there aren't adhesions issues and lifts during the print this design is optimised to print with a 0.8 nozzle, which is highly recommended, it can potentially also be printed with a .6 nozzle (increasing the default layer width), but don't recommend printing with a 0.4 nozzle the shades, as those are designed to be printed in vase mode and require a higher layer width this lamp is provided “as‑is.” users are solely responsible for ensuring that the final build is safe, complies with local electrical codes, and is used in a manner consistent with their own risk tolerance. use this design at your own risk. no liability is accepted for any damage or injury   assembly use a E14 light fixture kit and put the socket through the base secure the inner shade to the base using the light socket threaded connector, aligning before a tightening fully add the lamp add the outer shade (it will slide over the inner shade) finally guide the power cord through the cutout slot   components dimensions: base ~ x:147 · y:125 · z:75 inner shade ~ x:166 · y:150 · z:117 outer shade ~ x:175 · y:160 · z:119   photos show printed in PETG-HF   base settings PETG-HF .80mm nozzle variable layer height 10% adaptive cubic infill no supports shades settings PETG-HF .80mm nozzle  spiral vase mode .40mm layer height 1.2mm line width   notes includes STLs all photos uploaded are of the actual printed model, and are copyright protected if you enjoy this mo